Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Atomlab Torque Nipples
$21.95
- Proprietary 6mm thick (standard is 4mm) 7075 aluminum nipple offering the strength of a brass nipple while saving 20 grams per wheel, plus more pivot range at the spoke hole for reduced stress on spoke - Only for use with Torque nipple specific rims. Sold in bags of 36 nipples - T-20 Torx broach for pre-tensioning, 3mm flats for fine adjustment - See Tools - Wheelbuilding section for Atomlab Torque nipple tools
Black Ops Micro C-Drive Replacement #20 Cone Drive
$6.99
Replacement parts for Micro C-Drive Hubs. - Supplier Part: Replacement #20 Cone Drive
Black Ops Spoke Covers
$8.39
- Plastic spoke covers in a variety of colors - 300mm cut to fit length - 36 pieces - enough for one wheel - Increases visibility and demands attention
Black Ops MX-2000 Axles
$11.09 - $33.89
Replacement axles for MX-2000 hubs. Size: 14 x 100 x 165mm - Supplier Part: KT-M18F - MPN: 370666 - Front/Rear: Front - Diameter: 14mm - OLD: 100mm Size: 14 x 110 x 180mm - Supplier Part: KT-389R - MPN: 370668 - Front/Rear: Rear - Diameter: 14mm - OLD: 110mm Size: 3/8-inch x 100 x 165mm - Supplier Part: KT-M17F - MPN: 370667 - Front/Rear: Front - Diameter: 3/8-inch - OLD: 100mm Size: 3/8-inch x 110 x 180mm - Supplier Part: KT-M88R - MPN: 370682 - Front/Rear: Rear - Diameter: 14mm slotted for 3/8-inch - OLD: 110mm
Black Ops MX-1100 Axles
$21.29
Replacement axles for Black Ops MX-1100 hubs. Size: 3/8-inch x 100 x 140mm - Supplier Part: KT-576F - MPN: 370664 - Front/Rear: Front - Diameter: 3/8-inch - OLD: 100mm Size: 3/8-inch x 110 x 152mm - Supplier Part: KT-5V3R - MPN: 370665 - Front/Rear: Rear - Diameter: 3/8-inch - OLD: 110mm
Black Ops MX-3100 Axles
$21.29 - $46.19
Replacement axles for Black Ops MT-3100 hubs. Bearing shoulder to bearing shoulder is 59mm. Size: 3/8-inch x 100 x 140mm - Supplier Part: KT-M37F - MPN: 370685 - Front/Rear: Front - Diameter: 3/8-inch - OLD: 100mm Size: 3/8-inch x 110 x 175mm - Supplier Part: KT-M98R - MPN: 370686 - Front/Rear: Rear - Diameter: 3/8-inch - OLD: 110mm
Black Ops MX-2050 Axles
$31.49
Replacement axle for Black Ops MX-2050 hubs. Size: 3/8-inch x 110 x 175mm - Supplier Part: KT-AB9R - MPN: 370683 - Front/Rear: Rear - Diameter: 3/8-inch - OLD: 110mm
Bontrager Ceramic Bearings
$52.99 - $73.99
• Grade 3 balls and magnetite rust proof finish • Abec 5 precision and silicone w seals • 3 times cryogenic race treatment • Bearings sold individually, not as pair
Campagnolo Front Disc Brake Quick Release Conversion Kit
$31.95
Front disc brake quick release conversion kit from Campagnolo. - Convert Campagnolo Bora and Shamal disc brake wheels from thru-axle to quick release - Includes axle, end caps and adjusting sleeve - Quick release sold separately
Campagnolo Shamal Ultra Label Kit
$69.90
- Decals for replacement rims
Campagnolo Hub Rebuild/Upgrade Kit
$87.90
- USB and Cult ceramic renewing kits can be used to upgrade Campagnolo wheels that come stock with stainless steel bearings - Kit includes (2) each of dust seals, hub cones, hub cups, and ceramic or steel ball bearings
CeramicSpeed Mavic-15 Wheel Bearing Upgrade Kit
$499.00
Upgrade your Mavic wheels with a CeramicSpeed Wheel Kit to reduce friction, increase performance, and get the most out of your Mavic Wheels immediately. The high velocity of wheel bearings means that bearing friction can have a huge impact on performance. CeramicSpeed Wheel Bearings have a proven lifespan, which is 3-5 times longer than standard wheel bearings. In The Box: - 3 x 61901 bearings - 2 x 608/9 bearings - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet - Front hub bearings: 61901 + 61901 - Rear hub bearings: 61901 + 608/9 + 608/9 Remember to add grease and mount seals before installation.
CeramicSpeed DT-1 Wheel Bearing Upgrade Kit
$639.00
Choose to ride even faster by using CeramicSpeed Hub Bearings in your wheels. The DT Swiss-1 wheel kit fits 240s Road hubs, which are used by many wheel brands. Other kits are available for disc wheels and DT180 as well. The high velocity of wheel bearings means that bearing friction can have a huge impact on performance. CeramicSpeed Wheel Bearings have a proven lifespan, which is 3-5 times longer than standard wheel bearings. In The Box: - 2 x 61802 bearings - 2 x 61803 bearings - 2 x 61902 bearings - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet Remember to add grease and mount seals before installation.
CeramicSpeed DT-3 Wheel Bearing Upgrade Kit
$642.00
Choose to ride even faster by using CeramicSpeed Hub Bearings in your wheels. The DT Swiss-3 wheel kit fits 240s Disc hubs. Other kits are available for DT 240s rim brake hubs, and DT180 as well. The high velocity of wheel bearings means that bearing friction can have a huge impact on performance. CeramicSpeed Wheel Bearings have a proven lifespan, which is 3-5 times longer than standard wheel bearings. In The Box: - 2 x 61903/18 bearings - 2 x 61802 bearings - 2 x 61902 bearings - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet Remember to add grease and mount seals before installation.
CeramicSpeed Zipp-7 Wheel Bearing Upgrade Kit
$699.00
Optimize your Zipp wheels with CeramicSpeed Hub Bearings to benefit from reduced friction and increased performance. The result is higher speed with the same effort as well as a higher top speed. CeramicSpeed Wheel Bearings have a proven lifetime, which is 3-5 times longer than standard bearings. All components are optimized for low friction and prolonged lifetime. This wheel kit is compatible with 2015 & forward (77/177 hubs) + Mid 2018 & forward NSW Rim Brake Hubs. In The Box: - 4 x 61803 bearings - 2 x 61903 bearings - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet
CeramicSpeed Wheel Bearing Upgrade Kit: Zipp-9
$714.00
Optimize your Zipp wheels with CeramicSpeed Hub Bearings to benefit from reduced friction and increased performance. The result is higher speed with the same effort as well as a higher top speed. CeramicSpeed Wheel Bearings have a proven lifetime, which is 3-5 times longer than standard bearings. All components are optimized for low friction and prolonged lifetime. This wheel kit is compatible with 1st generation non-disc Zipp NSW (before mid-2018). In The Box - 4 x 61803 bearings - 1 x 61903 bearing - 1 x 61804 bearing - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet
CeramicSpeed Wheel Bearing Upgrade Kit: Zipp-8
$719.00
Optimize your Zipp wheels with CeramicSpeed Hub Bearings to benefit from reduced friction and increased performance. The result is higher speed with the same effort as well as a higher top speed. CeramicSpeed Wheel Bearings have a proven lifespan, which is 3-5 times longer than standard bearings. All components are optimized for low friction and prolonged lifetime. This kit is compatible with 2015+ (77/177 hubs) disc brake hubs & NSW Disc. In The Box - 4 x 61903 bearings - 2 x 61803 bearings - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet
Crank Brothers Front Axle and Endcap Kit
$19.99
Front axle and endcap kits for all non-boost 2017 cobalt, iodine, and zinc wheels. Use this front axle and endcap kit to convert any non-boost 2017 cobalt, iodine, or zinc wheel to the size selected below.
Crank Brothers Rear Endcap Conversion Kit
$19.99
These kits convert Crankbrothers rear hubs to 12mm thru axle and 10mm QR spacing. - 135×10QR – 2017 3 & 11 kit (SKU 99204) compatible with: Level 3 & 11 4th generation (2017+) hubs - 142/148×12TA – 2017 3 & 11 kit (SKU 99205) compatible with: Level 3 & 11 4th generation (2017+) hubs - weight 23g per pair
Crank Brothers Front Endcaps Kit
$35.99
9/15/20mm conversion kit for current generation front hubs - Cobalt endcaps – These kits convert current generation Cobalt front wheels to 9/15mm thru-axle. - Iodine/Opium endcaps - These kits convert current generation Iodine and Opium front wheels to 9/15/20mm thru-axle. - Conversion: 9/15/20mm - Cobalt weight: 26g (9mm) / 16g (15mm) - Iodine/Opium weight: 28g (9mm) / 18g (15mm) / 23g (20mm)
Crank Brothers Rear Endcaps Kit
$35.99
Converts cobalt/iodine/opium hubs from 142 to 135 qr spacing. Rear endcaps kit – this kit converts any crankbrothers 2, 3, or 11 wheelset from 142×12mm thruaxle rear spacing to 135×9mm qr rear spacing. Conversion: 135x9 mm Weight: 23g per pair
Crank Brothers XD Driver Body
$89.99
- Replaces freehub body on current Cobalt or Iodine wheels with SRAM XD compatible body
DT Swiss Squorx Pro Head Aluminum Nipples
$9.40 - $52.79
Ease of use, lightweight, and optimum performance in a single product. The DT Pro Head shape, combined with both a torx and a square tool interface, makes wheel building a lot easier. The spherical contact surface aligns the nipple perfectly with the spoke. All-brass nipples are recommended for e-bike use. Weight: starting at 26g for 64 nipples.
DT Swiss Aluminum Tubeless Valve
$11.20 - $13.00
Aluminum Tubeless Presta Valve - MTB or Road
DT Swiss Aluminum Tubeless Valve-Cylindrical Rim
$11.70
Aluminum Tubeless Presta Valve - MTB or Road - 18-25mm for Cylindrical Rims
DT Swiss Narrow Base Tubeless Valve
$11.70
Tubeless valves for DT Swiss rims for repair or replacement.
DT Swiss Standard Front Skewer
$12.00
DT Swiss Standard Front Quick Release Skewers. - Traditional cam-operated lever - Stainless steel shaft
DT Swiss Standard Rear Skewer
$12.00
DT Swiss Standard Rear Quick Release Skewers. - Traditional cam-operated lever - Stainless steel shaft
DT Swiss Standard Aluminum Nipples
$15.79 - $44.89
The buyer's choice for wheel builders looking to save weight. The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use. - Weight: starting at 20g for 64 nipples
DT Swiss Pro Head Spoke Reinforcement Washers for SPLINE One
$17.00
Pro Head Reinforcement System (PHR) has a larger and more spherical contact area and is designed to balance loads transferred to the rim. The PHR system acts as a ball and socket interface, allowing the spoke to pivot into alignment while maintaining even, consistent contact during installation in order to follow the perfect trajectory from the hub to the rim.
Page 1 of 13 Next page