Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Forks

$525.00
Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on. - Custom DT RWS Skewer included - 3.0" max recommended tire size - Axle to Crown Length: 480mm - Brake Mount: IS Disc Brake 160mm - Crown Race: 40 - Defined Color: Black - Front Axle: 15 x 100mm - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Weight: 750 grams - Wheel Size: 29-inch
$565.00
For carving XC courses, going the distance on gravel roads, or roaming along bikepacking routes, the Whisky No.9 MTN Boost Fork brings a new dimension to your mountain bike. Lighter and stiffer than a suspension fork, it’s long enough to replace forks with 120mm to 130mm of travel. The boost 110mm spacing means your current wheels will likely bolt right in, and clearance for up to a 29 x 3.0" or 27.5 x 3.0" tire lets you alter your setup for wherever you’re riding. The Three-Pack mounts handily hold extra water, camping gear, tools, tubes, and more. - 15mm thru-axle with 110mm Boost spacing - Post-style brake mount - 1.5" tapered carbon steerer - Two sets of Three-Pack mounts - ASTM Condition 3 - For rough off-road riding and jumps less than 24"
$450.00
ENVE's Road Fork is the fork by which all others are judged, built for road cyclists looking for the optimal balance of weight, strength, and stiffness. When everyone was turning away from the fork aftermarket, we focused our efforts on creating the best aftermarket fork we could. By following our mantra of functional simplicity, we developed a manufacturing process that allows the fibers in an ENVE fork to run continuously from the top of the steerer to the bottom of the drop-outs. The ENVE forks feature a hollow one-piece design free of bonding or drilling, and the brake bolt hole is molded into the crown, allowing for additional weight savings and strength. You can literally put an ENVE fork on a bike within minutes of it leaving the mold. While this manner of construction is novel, the real win is that the majority of artisan frame builders and customers choose ENVE as their fork of choice due to its confident on-road performance and handling characteristics.
$970.00
When performance and weight savings matter most, the new SID SL is the answer. Designed to be fast and nimble, SID SL Ultimate features our lightest damper to date, the new Charger Race Day. Completing a race-proven package, we've included the new DebonAir air spring tuned specifically for the demands of XC riders. Our friends at SKF and Maxima Plush Fluids come along for the ride providing long-lasting fork performance and improved overall suspension feel. It all adds up to the most advanced race-bred fork ever: SID SL. Features - 32mm chassis focused on low weight for the classic XC bike - Charger Race Day Damper - our lightest production damper with rock-solid lockout - DebonAir air spring is tuned specifically to meet the demands of XC and maintains a higher ride height for increased confidence and control - New Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise - Machined/anodized crown - Ultimate foil graphics package
$550.00
A purpose built carbon fiber fork for gravel and cyclocross applications featuring internal hose routing, flat mount brake compatibility, and clearance for up to 50mm tires. This fork is perfect for gravel riders looking for more clearance, weight savings, compliance, and the versatility of fender mounts to enhance their gravel grinding experience. - Material: Carbon - Weight: 520g - Steer Tube Length: 350mm - Rake: 50mm - Axle To Crown: 395mm - Max Rotor Size: 140mm – 160mm - Max Tire Clearance: 700c x 50c, 27.5 x 2.25-inch - Crown Race Diameter: 1.5-inch - Torque Spec - Steer Tube: 5.5Nm - Torque Spec - Axle: 8Nm
$10.00
Keep the weight down and your headset snug with the Specialzied Carbon Steerer Tube Plug.
$483.00
With bigger bikes there comes bigger demands. Thankfully, we created the 35 Gold to meet all of them, both in performance and value. Whether you have an E-MTB or MTB, the burly 35 Gold checks the box with our proven DebonAir spring and Motion Control damping. And new this year is an E-MTB-focused option with mounting points for optional full or short fenders. All told, you might wonder how we packed so much quality and performance into such a wallet-friendly package. Features - New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (1.8" taper available) - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Highly tunable DebonAir spring offers a consistent feel throughout the travel - Fits Tires up to 2.8" (without fenders; the use of a full fender will reduce tire clearance) - Fast Black finished 35mm aluminum upper tubes couple stiffness and lightweight with a premium look - Offset: 44mm
$749.00
For all the ups, downs and to get you to everything in between. Lyrik Select combines an updated DebonAir air spring with the trusted Charger RC damper for unmatched trail control and precision. Maxima Plush fluid reduces friction, silences noise, and provides all-around lasting performance. Features: - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Charger RC damper featuring low speed compression adjust - Maxima Plush damping fluid reduces friction and silences damper noise
$537.00
One of the most successful and hard-working RockShox forks of all time capitalizes on the innovations born from SID. It features a chassis that combines classic XC performance with light trail duties, while a Motion Control damper completes the package, making Reba more capable than ever before. Features - New graphics package for a fresh, premium look - Highly tunable Solo Air spring - TwistLoc and OneLoc remote compatible
$537.00
Little riders with big dreams. Until now, a premium fork was tough to find for smaller riders. Welcome Reba 26, a fork specifically tuned for lighter riders to simplify the ride experience and allow for a lower pressure range. Features - New graphics are easy to read and make a fresh impact - Specifically tuned for smaller riders - External rebound adjustment - Offset: 40mm
$537.00
Yari shares the stiff, hard-hitting chassis as the Lyrik and combines it with the updated DebonAir air spring and proven Motion Control damper. The Yari fork is designed to inspire confidence for those hard-hitting enduro and E-MTB riders alike. - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - New graphics package for a fresh, premium look - Motion Control damping featuring low-speed compression adjustment
$843.00
- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible. - Charger RC damper featuring Low Speed Compression adjust - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. - RockShox premium short fender included - Maxima Plush damping fluid reduces friction and silences damper noise
$1,107.00
- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible. - ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - Charger 3 features a new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". - DebonAir+ is built to balance butter-like small bump feel, increased air volume, and higher overall ride height - Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible - Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature. - RockShox premium short fender included
$1,159.00
- 38mm chassis for increased stiffness and rider confidence - ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - Charger 3 features a completely new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume, and higher overall ride height. - Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible - Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature - Includes premium short fender
$425.00
The Whisky No.7 RD thru-axle fork is a thoroughly modern road fork for road bikes with tapered steerer tubes. It features a 12mm thru-axle for precise handling, clearance for high-volume road tires, and clean internal cable routing. Flat mount brake capability offers clean caliper fitment and backwards compatality with post mount brakes using adaptors. - 100 x 12mm thru-axle - 1-1/8 – 1.5" tapered steerer - 45mm offset
$375.00
The No.7 Road fork is a thoroughly modern design, compatible with road bikes that utilize tapered steerer tubes. Features include 9mm x 100mm QR dropouts and brake mount for short-reach caliper rim brakes, to easily accommodate standard road wheels. The fork offers low weight, precise handling and tire clearance for up to 700 x 28c tires. - 9mm x 100mm spacing - For use with short reach caliper rim brakes - 700 x 28c max recommended tire size - ASTM Condition 1 - For use on paved surfaces - Includes Whisky Parts Co. compression plug - Axle to Crown Length: 367 mm - Brake Mount (Fork): Short Reach Caliper (39mm - 49mm) - Color: Black - Crown Race: 30 - Defined Color: Black - Front Axle: 9mm x 100mm - Material: Carbon - Offset: 43 mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Straight - Steerer Tube Length (mm): 300 mm - Weight: 370 g - Wheel Size: 700c , 650b - Maximum Tire Clearance (Fork): 30c
$525.00
Whisky's No.9 RD+ is an all-road fork designed for versatility with abundant tire clearance, up to 700x38c or 650x47c. Hidden and removable fender mounts make this fork all season capable. - 12mm Thru Axle - Flat Mount Disc Brake - Tapered Steerer Tube - 700x38c/650x47c clearance
$565.00
Sleek and serviceable, the Whisky No.9 CXLR Fork is a tough, lightweight upgrade for gravel riders and bikepackers looking to carry a little cargo up front. Sporting 3-pack mounts, mid-blade mounts for low-rider rack compatibility, and fender eyelets on the outside of the fork legs for easy mounting, the CXLR keeps everything clean and tidy with internal routing for brakes and dynamo hubs. Additional features like flat-mount brakes, 12mm thru-axles, and ample tire clearance make this standout piece perfect for your packing setup. - 12mm thru-axle, 100mm spacing - 700c x 42mm or 650b x 50mm max recommended tire size - ASTM Condition 3 – For rough off-road riding and jumps less than 24 - Includes thru-axle and Whisky Parts Co. compression plug - Brake Mount: Flat Mount 140 - Material: Carbon - Weight: 526g - Steerer Type: Tapered - Offset/Rake: 45 - Steerer Tube Length: 350mm - Axle to Crown Length: 395mm - S.H.I.S. Crown Race Diameter: 40 - S.H.I.S. Stem Clamp Diameter: 28.6 - Fork Minimum Rotor Size: 140 - Fork Maximum Rotor Size: 160
$425.00
The No.7 road fork features full unidirectional carbon construction, available in tapered or straight steerer tubes. - Full unidirectional carbon construction - Mid-Reach Caliper rim brake compatible - 35c max recommended tire size - ASTM Condition 2 - For off-road riding and jumps less than 12" - No rider weight limit - 5 year Whisky warranty - Accommodates road plus tires - Fender mounts
$379.99
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most important component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high loads. Those muscular shoulders aren’t just for looks as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: This particular model fork pushes our Oversized Technology to the extreme as it includes the 1.5 to 1-1/8 inch tapered 7000 series aluminum steerer tube and stiffer 20mm through-axle cold-forged dropouts. Say goodbye to deflection. Weight Limit: 115kg (253 lbs) with limitations as per Category 2 of EN 16054:2012 Standard FEATURES - Oversized Technology™ - Tapered Steerer Tube to Reduce Deflection - 20mm Through Axle to Increase Responsiveness - Internal Butterfly for Added Durability at Steerer Tube and Fork Crown Interface
$349.99
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the most important component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high loads. Those muscular shoulders aren’t just for looks as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: This particular model fork is tailored for larger-sized racers. It also takes our application of Oversized Technology one step further as it includes a tougher 1-1/8 inch chromoly steerer tube and stiffer 20mm through-axle cold-forged dropouts. Weight Limit: 115kg (253 lbs) with limitations per Category 2 of EN 16054:2012 Standard. FEATURES - Oversized Technology™ - Chromoly Steel Steerer Tube to Accommodate Larger-Sized Racers - 20mm Through Axle to Increase Responsiveness - Internal Butterfly for Added Durability at Steerer Tube and Fork Crown Interface
$699.00 - $729.00
The Z1 is freedom from the status quo. Step outside enduro's obsession with counting seconds and go have some fun in the woods. The Z1 is an aggressive all-mountain and enduro fork with a different viewpoint for riders' priorities. Everyone wants suspension performance that's smooth as butter with great traction and control, and that's where the Z1 shines. After that, the Z1 departs from industry norms. More time fiddling with adjustments means less time shredding the trails. The Z1 keeps it simple with intuitive compression sweep adjustment, from locked out to full open. Simple rebound adjustment covers the range from fast to slow rebound for a full range of rider weights and preferences without overcomplicating things. Plus, it's biased towards stiffness, ride performance, and durability, so while it's carrying a few extra grams, you probably won't notice because you're having too much fun. - 36mm stanchions - Enhanced lower leg stiffness with "M" arch design for maximum tire clearance - 15 QR x 110mm Boost axle - FIT GRIP damper with adjustable compression and rebound - FLOAT EVOL air spring
$1,249.00
FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. - The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs - Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality - The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release - Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping - Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button - The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding
$449.95
Ritchey's history with cyclocross runs long and deep, sort of like the mud sections of your favorite 'cross course. The WCS Carbon Cross Canty Fork is designed for the rigors of cyclocross and those who demand traditional canti brakes. Decades of experience between the course tape and building the bikes and components designed to win inform the performance and design details of this fork. It employs a monocoque construction, and it's compatible with standard and integrated headsets. - Material: carbon fiber - 1-1/8" straight steerer with integrated 45-degree crown race - Fits 1-1/8 and 44mm headtubes with appropriate headsets - Steerer length: 300mm - Fork length: 395mm - Rake/Offset: 45mm - Crown diameter: 45mm - Spacing: 54mm - Minimum tire clearance: 6mm - Wheel compatibility: 700c - Weight: 448g (with uncut steerer / not including axle)
$89.99
- Forged dropouts with eyelets, straight-gauge oval tapered blades - Dimension Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing - 85mm threaded section - Fits up to 30c tires - Axle to Crown Length: 382 mm - Brake Mount (Fork): Long Reach Caliper (55mm - 73mm) - Crown Race: 27 - Front Axle: 9mm x 100mm - Material: Steel - Offset: 50mm - S.H.I.S. Stem Clamp Diameter: 25.4-24tpi Quill - Steerer Type: Straight - Weight: 839g, 876g, 907g - Wheel Size: 27"
$210.00 - $322.00
Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Silver level forks give you stiff steel upper tubes and TurnKey lockout. Features - New graphics package with E-MTB endorsement option (15x110mm) - TurnKey lockout gives 'on/off' control - Fits Tires up to 2.8" (15x110mm) - Fast Black finished 30mm steel upper tubes couple stiffness and lightweight with a premium look - Plush, highly tunable Solo Air spring - Disc brake compatible - Offset: 51mm (29-inches) - Steerer Diameter: 1.5-inch Tapered
$790.00
- 35mm chassis at home on the trail - stiff, playful, and light, really light - Charger RC damper featuring Low Speed Compression adjust - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. - RockShox premium short fender included - Maxima Plush damping fluid reduces friction and silences damper noise
$27.00
Service your suspension fork with Enduro Seal KIts. - Custom made for each make and model of fork
$1,099.99
The versatility of the Cane Creek HELM continues with the new HELM DJ. The new Cane Creek HELM DJ combines the proven performance, reliability and strength of the HELM MKII's chassis with a new short travel air spring optimized for Dirt Jumps, Dual Slalom and Street riding. Preset at 90mm travel and a 483mm axle to crown to accommodate a 26" wheel without changing the geometry of your dirt jump bicycle.
$144.99 - $169.99
Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. 1-pc machined steerer tube with an integrated bearing race, tapered legs, and plenty of tire clearance.
$969.00
34 Factory is the ultimate trail companion. Featuring an EVOL air spring, choice of dampers, and a lightweight yet robust chassis, you can count on 34 to get up and down the mountain, every time. - Genuine Kashima Coating on upper tubes - FLOAT EVOL air spring
$843.00
The new Rudy is a perfect match for your gravel bike. It's energy-efficient for straightaways and offers enough travel to keep you comfortably in control when things get rough. Featuring all-new 30mm upper tubes built around the Charger Race Day damper (our lightest damper ever) and our proven SoloAir spring. Rudy offers precise steering, full or short fender compatibility, and the looks to make your road bike proud. Everything designed with the needs of gravel riders in mind. - Purpose-built and laser-focused on gravel and e-gravel bikes - 30mm upper tubes are light and look the part - 30mm and 40mm travel options - Charger Race Day damper tuned for gravel needs with rock-solid lockout and a full range of rebound adjust - Solo Air spring perfectly tuned for shorter travel and efficiency over bumps - Short fender compatibility with a 3-bolt system - Full fender compatibility with custom stealth stay bosses - Lightweight machined and anodized crown offers a premium and durable finish - Maxima Plush damping fluid reduces friction and silences damper noise - Up to 700x50 tire clearance - Available in new Kwiqsand Signature colorway or Gloss Black - E-bike approved
$612.00
One of the most successful and hard-working RockShox forks of all time capitalizes on the innovations born from SID. It features a chassis that combines classic XC performance with light trail duties, while a Motion Control damper completes the package, making Reba more capable than ever before. Features - New graphics package for a fresh, premium look - Highly tunable Solo Air spring - TwistLoc and OneLoc remote compatible
$263.00 - $354.00
An entry level fork with the latest features and performance; Judy Silver is built around a brand new chassis derived from the Pike, works with Plus tires up to 2.8 in both the 27.5" and 29" models. Judy Silver features the Motion Control RL damper and is compatible with OneLoc remotes and has Fast Black upper tubes for an all-black look and low friction performance. - 80-120mm travel - External rebound - TurnKey lockout controls - Fast Black upper tubes - Motion Control RL damper - Compatible with OneLoc remote
$625.00
A carbon fork designed for bikepacking and endless exploration. Experience easier carrying of all possible accessories for everything from overnight endeavors to epic self-supported excursions with the ENVE Adventure Fork. The ENVE Adventure fork provides a lighter weight option for bikepackers and frame builders, while still maintaining reliability and strength. The dynamo light and charger routing is an integrated and protected solution to self-supported bike riders' needs. Finally, the fork chip option gives builders versatility in the fork by adjusting the axle-to-crown for different bike geometries for alternative bikepacking methods. In a market that's filled with heavy steel fork options, the ENVE Adventure fork offers bikepackers an opportunity to lighten their overall bike load through our trusted carbon fiber fork expertise. - Three-Pack Accessory Mounts - Fender and Rack Mounts - Reversible Drop-Out Chips for Adjustable Axle-To-Crown and Rake - Internal Dynamo Routing for Lights and Electronics Charging - Axle Spacing 12 x 100mm - Compatible Rotor Sizes 140mm & 160mm - 700 x 50mm Tire Clearance
$1,049.99
The new Mattoc is the fruit of one of the most profound development cycles in Manitou history. It is the physical embodiment of “great things take time”. It is not an offering that follows the crowd, designed around the latest trend or buzz of the market. Rather, a component that aims to add real value and benefit to the rider. Capable of not only pulling duty in a range of disciplines ranging from XC to light enduro but doing so with zero compromise makes the Mattoc “best-in-class” ! The lightest, stiffest, and most tunable fork over more segments than any of its competitors, the Mattoc PRO is an amazingly versatile product capable of vastly improving your time in the saddle. At 1750 grams it is a featherweight solution given its wide travel range, yet its industry-leading stiffness lends it to a performance without rival. Consider also its amazing reliability and you have a fork that does it all and does it amazingly. A true, no-compromise, authentic fork, serving the real needs of the widest range of the mtb public and offering serious performance advantages to each individual one of them, no matter how they choose to ride. The Dorado Air spring with IRT allows for an extremely lightweight build yet a suspension performance derived from our top-of-the-line DH fork. Compression damping via MC2 Sealed Cartridge with HBO technology and a sealed damper TPC for rebound, and you’ve got yourself an extremely sophisticated piece of suspension technology. Adjustable Air, IRT, Rebound, High and Low-Speed compression make for perhaps the most tunable, personalized custom performance suspension solution available on the market. Include all of this technology into an extremely stiff, reliable, 1750 gram package and you have a ride-changing component that is the envy of the industry Key Features: - 59 grams decrease from the previous model. - Over 19% stiffness increase from the current 27.5” 160mm to the new 27.5” 150mm. 29” Stiffness increases are higher. - DoradoTM air allows for internal travel adjustments with no added parts. New travel spacers account for negative air volume change, so the 110mm fork has the same initial stroke feel as the 150mm. - Dorado Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Dorado Air is our lightest-weight air spring technology. - Infinite Rate TuneTM (IRT) allows for advanced spring tuning by independently adjusting air pressures in the beginning and end stroke. IRT technology creates a secondary positive air spring that affects only the middle-to-end stroke of the fork. This allows the main air spring to be set to lower pressures for improved small bump sensitivity while maintaining mid-stroke support and moderate to aggressive end-stroke ramp-up. - Sealed Dampers offer more consistent damping and lighter breakaway force, especially over long descents. Our Damper uses a bladder system to compensate for head build-up along with a relief valve. Using both systems gives us consistency along with a long service life. Having non-adjustable HBO eases setup for the user. - TSR (Trail Side Relief) casting bleed screws allow users to release casting pressure from the fork. Releasing casting pressure can improve overall fork feel and small bump compliance.
$999.00
Cross-country purists… we see you. You’re why SID SL Ultimate is the lightest XC fork on the trail. But weight is meaningless without world-class performance and durability. SID SL features a new Charger Race Day 2 Damper that adapts to anything the race course throws at you. FEATURES - Our lightest 32mm chassis ever. World Cup-proven performance, built for your next podium result. - Longer-travel 110mm option, in case you’re feeling extra. - Charger Race Day 2 damper is the lightest damper on the market. This 2P damper features two compression positions: Open or a rock-solid Lock. - Maxima Plush Dynamic Suspension Lube reduces friction and enhances fork performance ride after ride. - Machined crown for lighter weight and greater strength. - Covetable “Blue Crush” signature colorway and Ultimate High Gloss Black, featuring the new lustrous Pearl White graphics package. - DebonAir air spring is tuned specifically to meet the demands of XC and maintains a higher ride height for increased confidence and control.
$919.00
THE HARD CHARGING DO IT ALL TRAIL FORK Smoother, lighter, more tunable, and more capable than ever before; when it comes to a do-it-all trail fork the 34 is in a class of its own. - LOWER LEG BYPASS CHANNELS As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Our lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. - LOWER LEG ARCH Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. - GRIP2 Our GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes our patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time consuming and complicated task of completely disassembling and reassembling the fork. -FLOAT EVOL Returning with the same legendary suppleness and longevity, the EVOL air spring in 34’s now has an enlarged negative air spring to assist with mid-stroke support. - Performance-Elite series with black anodized stanchions - Step Cast (SC) legs with narrow stance and stepped design to saves weight, decrease frontal area, and provide clearance for the spokes and brake rotor - FIT4 damper with 3-position damper control - 160mm to 203mm rotor compatible post mount - Lightweight Kabolt thru-axle - Tapered threadless steerer
$699.00
The Beryl is a product aimed at the "set it and forget it" rider. The Beryl features all of the smooth qualities you've grown to expect from DVO in a condensed feature package. - D2 damper provides a 3-position low-speed compression adjuster to quickly go from a climb setting to wide open DH - OTT feature offers 3 settings of small bump compliancy to work with any air pressure or rider weight - Easy access external rebound adjuster provides a wide range to work with
$1,149.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvements
$1,249.00
FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. - The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs - Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality - The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release - Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping - Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button - The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding - GRIP2 damper includes Fox's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance - FLOAT EVOL air spring technology increases negative air spring volume, optimizing small bump sensitivity - Direct mud guard mount - Genuine Kashima Coating on upper tubes - 27.5: 723mm peak tire diameter
$1,249.00
FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. - The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs - Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality - The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release - Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping - Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button - The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding
$549.00
Whether you’re racing to make it to your meeting across town or striving for a personal best down your favorite new trail, the AWL e-SUV fork will get you there on time and in style. Featuring an all-new chassis, RAIL damper, and different travel options, the AWL is equipped to forgive rock and roots as well as curbs and potholes. Includes integrated mounts for fenders, lights and accessories. - Award-winning RAIL damper delivers premium suspension performance with simple yet effective adjustability and maximum durability - Stiff 34mm e-optimized chassis meets the most stringent e-bike testing standards - Integrated fender and light mounts delivery maximum versatility - Clearance for tires up to 2.6” wide - 160-230 mm rotor compatible
$149.99
The Hurricane features P² Post Production heat-treatment for superior strength. Our one-piece, spiral-fluted (Vortex) steerer reduces weight without decreasing strength. The 31.6/1.4/1.1mm tapered legs are fluted as well, making these the strongest forks we've made to date. Top it off with our new, investment-cast 6mm-thick dropouts and you've got a fork you can trust to hold up to any style of riding. Vortex top cap included. - Height: 314mm - Steerer Tube Length: 172mm - Bearing Race: Machined/Integrated - Offset: 28mm - Compression Bolt: 24 x 1.5mm - Compression Bolt Tool: 6mm allen key - Colors: Matte Black - Weight: 36.2-ounces
$309.95
- Straight or tapered alloy steerer all road carbon fork - Fender mounts and 6 fork eyelets for water bottles/bags - Includes 12mm/15mm thru-axle on specific versions - Tire clearance for 700x42c 700x40c w/fender or 650Bx50c road plus tires - Steerer: 1 1/8" - 1 1/2" tapered or straight 1 1/8" available - Uncut steerer tube length is 300mm - Platform style racks for supporting randonneur style handlebar bags are okay, using the fork crown hole and lowest eyelet (just above the dropout) - Not compatible with Tubus Tara, Salsa DownUnder, and other lowrider racks, the mounts are designed for light loading only - Steerer tube expander plug not included - 747g - 45mm rake
$376.00 - $408.00
Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Gold level gives you aluminum upper tubes and Motion Control damping. Features - New graphics package with E-MTB endorsement option (15x110mm) - Motion Control damping featuring low-speed compression adjustment to lockout - Fits Tires up to 2.8" - Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look - Highly tunable Solo Air spring
$537.00
Revelation is all grown up and ready to explore, wherever the trail may turn. Value-packed, the Revelation features an updated DebonAir spring paired with a Motion Control damper and 35mm Fast Black upper tubes. - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Motion Control damping featuring low-speed compression adjustment to firm - Chassis is derived from the renowned Pike fork - New graphics package for a fresh, premium look
$250.00 - $376.00
With optimized material concentrated at the brace and seal area, outstanding stiffness and steering precision, and new E-MTB configured fork options with fender mounting points, Recon Silver is an all-around performer suited for any MTB or E-MTB bike. Features - New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (15x110mm version) - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Fit Tires up to 2.8" (15x110mm version without fenders; the use of a full fender will reduce tire clearance) - Fast Black finished 32mm steel upper tubes couple stiffness with a premium look
$779.00
Riders have been asking for it, and Marzocchi heard the call and has proudly delivered. The new Z1 Coil builds on the legacy of the single-crown fork that started the revolution way back in the '90s – the O.G. Bomber Z1 Coil. Starting with the stout and proven 36mm chassis of the modern day Bomber Z1, the new Z1 Coil retains the renowned Grip damper but swaps out the air spring assembly for the most advanced coil spring system Marzocchi has ever made. At the heart of this new coil system is an ultra-lightweight tempered silicon-chromium steel spring (available in 4 spring rates to suit a wide range of riders) coupled with a noise management system for near silent performance, an integrated air assist for progressivity and bottom-out control, and an external preload adjuster to dial in sag and firmness off the top. Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers. - Ultra-lightweight tempered silicon-chromium steel spring (Medium Spring included) - Noise management system for near silent performance - Integrated air assist for progressivity and bottom-out control - External preload adjuster to dial-in sag and firmness off the top - Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers - Additional springs sold separately to fine-tune and adjust for rider preference - Rake: 44mm
$1,089.00
The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Genuine Kashima Coating on upper tubes - FIT4 damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities - Kabolt Thru Axle
$1,049.99
Featuring 37mm stanchions and our Reverse Arch design the Mezzer Pro is the stiffest Enduro fork on the market… it’s also the lightest. How did we manage to accomplish this you ask? Well, it’s not hollow if that’s what you're wondering. In fact, this fork is loaded with technologies such as a fully sealed MC² damper, our proven Dorado air spring, and the life-changing IRT volume adjuster. What does all this mean? It means you no longer need to pick two, you can have the lightest, stiffest, and incredibly adjustable fork all at once. Key Features: - 37mm stanchions, Reverse Arch design, and Hexlock SL2 axle combined together result in ultimate stiffness - Originally developed for the Dorado down-hill fork, the Dorado Air Spring offers ultimate sensitivity featuring a self-equalizing negative air spring. When inflating the fork both the positive and negative air chambers are filled simultaneously equalizing the pressures to create an incredibly supple feel - IRT (Infinite Rate Tune) volume adjuster allows control over the mid-stroke support and bottom-out progressivity independent from the initial spring rate to independently tune small bump sensitivity and big-hit performance - Sealed MC² damper provides a range of blow-off thresholds to satisfy any requirement with separate high-speed and low-speed adjustments. Utilizing a bladder, our new sealed cartridge maintains damping consistency in the most severe riding conditions. •140mm to 180mm internally adjustable travel in 10mm increments (travel spacers included) •27.5” and 29” wheels •Integrated flexible fender can be installed/removed by three small screws threaded into the arch of the fork Product Details: - 37mm stanchions Reverse-Arch design and Hexlock SL2 axle for the ultimate stiffness - Fully adjustable IRT air spring to fine-tune ride feel - Sealed MC2 damper provides a range of blow-off thresholds to satisfy any requirement with separate high-speed and low-speed adjustments - 140mm to 180mm internally adjustable travel in 10mm increments (travel spacers included) - Integrated flexible fender can be installed/removed by three small screws threaded into the arch of the fork
$499.99
The Circus project started as a way to get our slopestyle riders into competition, but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade. - Air Spring - ABS+ Compression Damping w/ Jump Stack - Adjustable TPC Rebound Damping - 130mm travel models can be reduced to 120mm and 100mm models can be reduced to 80mm travel using included spacers - 20mm hex axle provides superior torsional stiffness - Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping - Forged I-beam style crown: bigger, stronger, and more durable - Alloy steerer, and 32mm aluminum stanchions
$1,949.99
Legends Never Die Back in a big way, the all-new Dorado Pro is ready to turn the suspension world upside down. Featuring an inverted design, carbon upper structure, 37mm stanchions, and refreshed internals the new Dorado Pro is the pinnacle of suspension technology. The new stiffer chassis is paired with an all-new sealed version of our TPC+ damper and improved Dorado Air Spring with an IRT volume adjuster. These technologies combined into one ultimate platform provide more than enough tunability to satisfy any savvy suspension tuner while being so easy to adjust that every rider can dial in their fork with ease. Key Features: - Carbon Fiber Legs and the 37mm chassis result in the stiffest and lightest Dorado to date. The carbon pro chassis is 27% stiffer than the previous 36mm version and 238g lighter than the new 37mm Expert version. They also have looks that can kill. - Inverted Design provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain. - Dorado Air Spring system contains a unique balancing valve that equalizes the positive and negative air chambers during the air-fill process resulting in a consistent feel without any flat or dead spots. It also allows easy Travel Adjustability from 180 to 190 and 203mm without the need for any spare parts. - IRT (Infinite Rate Tune) allows for advanced spring tuning by independently adjusting air pressures in the beginning and end stroke. IRT technology creates a secondary positive air spring that affects only the middle-to-end stroke of the fork. This allows the main air spring to be set to lower pressures for improved small bump sensitivity while maintaining mid-stroke support and moderate to aggressive end-stroke ramp-up. - Sealed TPC+ is a velocity and position-dependent damping circuit that maintains light damping through small bumps when the fork is high in its travel. As the fork compresses deeper in the travel the secondary TPC+ circuit engages and increases the damping force for added support and bottom-out prevention. Additionally, an independent Hydraulic Bottom-out circuit further increases the damping force in the final 30mm of travel to soften deep travel events and prevent hard bottom-out. The new cartridge design with spring-backed IFP fully seals damper oil for the most consistent damping on long demanding DH runs. Spring-backed IFP has improved performance during extreme riding, unlike a bladder an IFP pressurizes the oil at the initial stroke eliminating any cavitation for the most consistent damping. - Fits both 29" and 27.5" wheels. Markings on the outer legs indicate the proper clamping point for the ideal axle to crown measurements depending on wheel size. The fork legs can be used with both wheel sizes. - Two Crown Options are available with this fork. The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible. - TSR Bleed buttons allow you to release excess pressures built up in the outer legs of your fork with a simple tap of the button. This keeps your fork smooth and supple all day long. Product Details: - 37mm 6000 Series Aluminum stanchions with carbon fiber legs - Externally Adjustable: high-speed compression, low-speed compression, and rebound - Dorado air spring with IRT (Infinite Rate Tune) volume adjuster allows the rider to adjust mid-stroke support and bottom-out progressivity independent of initial spring rate - TPC+ Damper with HBO (Hydraulic Bottom Out) - TSR Bleeders - Includes removable bolt-on fender
$474.99
The Circus project started as a way to get our slopestyle riders into competition, but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade. - 80/100mm or 120/130mm Internally Adjustable Travel - Air Spring - ABS+ Compression Damping w/ Jump Stack - Adjustable TPC Rebound Damping - Wheel Size: 26" - 130mm travel models can be reduced to 120mm and 100mm models can be reduced to 80mm travel using included spacers - 20mm hex axle provides superior torsional stiffness - Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping - Forged I-beam style crown: bigger, stronger, and more durable - Alloy steerer, and 32mm aluminum stanchions
$1,049.95
- All Mountain/Enduro fork with 35mm stanchions - Twin-tube damper with low-pressure IFP and air spring (positive and negative air chambers), internal travel adjustment (120-160mm of travel in 5mm increments*) easily adjustable, and all parts included - ChocoLUXE Internals - ChocoLUXE is a proprietary material utilized in the damper plug, damper seal, damper IFP, and damper support. - Norglide Bushings—Norglide Bushings from Saint Gobain are metal-reinforced, self-lubricating bushings with a layer of a low friction PTFE compound. - Damper adjustments include air spring pressure, 8-position compression, ramp control (air spring ending stroke feel), and rebound - Ramp Control—'on the fly' ending stroke compression adjustment - 74mm post-mount 180mm disc brake only - Boost 15x110mm QR thru-axle - Every MRP fork is built in the MRP factory and dyno verified to ensure the highest level of quality and ensure long-term reliability - 4.2lb (1950g)
$1.75 - $43.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
$999.00
Cross-country purists… we see you. You’re why SID SL Ultimate is the lightest XC fork on the trail. But weight is meaningless without world-class performance and durability. SID SL features a new Charger Race Day 2 Damper with three-position (3P) compression damping—rigid Lock, plush Open, and efficient Pedal positions, on demand for every inch of the race course. FEATURES - Our lightest 32mm chassis ever. World Cup-proven performance, built for your next podium result. - Longer-travel 110mm option, in case you’re feeling extra. - Charger Race Day 2 damper is the lightest damper on the market. This 3P damper features three compression positions: Open, Pedal, or a rock-solid Lock. - Machined crown for lighter weight and greater strength. - Covetable “Blue Crush” signature colorway and Ultimate High Gloss Black, featuring the new lustrous Pearl White graphics package. - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. -DebonAir air spring is tuned specifically to meet the demands of XC and maintains a higher ride height for increased confidence and control.
$612.00
One of the most successful and hard-working RockShox forks of all time capitalizes on the innovations born from the latest SID. A chassis that combines classic XC performance with light trail duties and a Motion Control™ damper completes the package, making Reba as capable as ever before. - Proven Motion Control damper featuring low-speed compression adjust to lockout with external rebound adjust - Torque Caps compatible for a stronger, stiffer interface between fork and hub, giving you more control in the front wheel - Accepts Bottomless Tokens to easily custom tune the air spring performance to best match you own riding style and suspension preference - Solo Air spring for a plush, predictable ride you can set up in seconds
$350.00
The Whisky No.7 RD fork is a modern caliper road fork for road bikes with tapered steertubes. Their No.7 RD fork features a standard 9mm x 100mm QR axle. It offers low weight, precise handling, and clearance for 28c tires. This is a perfect upgrade fork for in lieu of a steel or alloy fork, and makes a great replacement fork for existing carbon product.
$579.00
With bigger bikes come bigger demands. The new Domain takes cues from ZEB, our enduro specialist fork with serious credentials. Domain offers a new burly 38mm chassis, short fender compatibility, and a confidence-inspiring DebonAir air spring matched with a reliable Motion Control RC damper. We even brought the performance of Maxima Plush damping fluid along for the ride. Nothing goes as big as Domain does in value and performance. - 38mm chassis for increased stiffness and rider confidence - Motion Control RC damper featuring low speed compression adjust with externally adjustable dual-flow rebound - Highly tunable DebonAir air spring offers a consistent feel throughout the travel - Maxima Plush damping fluid reduces friction and quiets damper noise - Short fender compatible. RockShox premium fender sold separately. AM Variants include RockShox zip-tie fender - Fits tires up to 2.8" without fenders—use of any fender may reduce tire clearance
Page 1 of 3 Next page