Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Racks

$100.00
The Globe Front Rack bolts directly to the two mounts on the head tube to create a tough-as-nails platform for carrying whatever your heart desires. By mounting directly to the bike frame, heavy loads can be distributed with minimal effect on handling and stability. It's also compatible with the Globe Haul's front and rear pannier adapters, allowing you to carry 5+ full grocery bags. The T-channel rail material means you can bolt on additional accessories to the sides to further customize your setup. It also accepts MIK accessories, like the MIK adapter & Turbo Basket, for fast and secure installation. - Designed for frictionless compatibility with Haul ST and Haul LT. - MIK accessory-compatible. - T-channel rail construction. - 20kg (44lb) load capacity. 30cm length, 32cm width - Installation requires tools (not included).
$165.00
The VO Porteur Rack is a traditional-style rack as used on the famed Parisian newspaper delivery bikes. Those Parisian delivery bikes were reputed to carry as much as 110lbs. of newspapers on similar racks (of course, the bikes had strengthened frames and forks, not just racks). Our Porteur Rack is made from strong stainless steel tubing and polished to a lovely shine. It won't rust like painted steel racks or fatigue and crack like aluminum racks. The quality is actually superior to that of many custom racks. In short, this is a real load-carrying rack, not an aluminum "style-rack". Yet total weight with rail, nuts, bolts, etc. is only 1.079kg. The platform is about 36cm x 29cm. A removable rail attachment is included and very handy for smaller packages. The tangs are pre-drilled to fit 700c, 27", 26", and 650b bikes. There are four bosses for a light attachment. There is a boss for securing your fender to the rack -- no rattling! Please also note the elegant pannier/tie-down loops above the mounting tangs. Mounting hardware is included. The Porteur Rack mounts to the dropout eyelet and the brake bolt (or fork crown hole). Max weight with this configuration is 25 lbs.
$7.00
These are simple polished stainless steel struts which can be used to mount many of our racks to your bike's brake bridge or fork crown. Available in Small and Large sizes. - Small is 8.5cm long from end to end - Useful for mounting our Constructeur Rear Rack to your brake bridge. - Useful for mounting our Constructeur Rear Rack to your brake bridge. Also used for mounting our Randonneur, Constructeur Front, and Porteur Racks to your bike's fork crown. - Note: not required if you mount the rack to metal fenders, as is traditional.
$52.95
- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - 625g - 55lb weight capacity
$64.95
- Specifically designed for 29" mountain bikes and larger volume 700C wheels - Compatible with bike frames equipped with disc brakes - Tubular aluminum rear rack for loaded touring - MTX 2.0 QuickTrack compatible with all MTX Trunk Bags or MTX rear baskets - 6061 T-6 hollow aluminum - 55lb weight capacity - 680g
$57.95
- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061 T6 alloy construction - To be mounted on bikes with disc brakes - 625g - 55lb weight capacity
$57.95
- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - Spring clip for additional cargo security - 800g - 55lb weight capacity
$109.95
- This one size fits all tubular aluminum rear rack is designed for Fat bikes with disc brakes - Adjustable rack legs fit most 24" & 26" Fat bikes - Integrated side bar provides a lower pannier attachment for more cargo on top of the rack - The MTX 2.0 QuickTrack plate is compatible with any Topeak MTX trunk bag, MTX rear basket, and most other rack packs and panniers on the market - Not compatible with asymmetric rear stay design Fat bike frames - Includes extra-long mounting bracket and rear light mount - Max weight 55lbs - 16.9 x 13.4 x 11.4" - 2.79lbs
$69.95
Topeak's MTX BeamRack is an awesome way to add touring capacity to bikes that won't accept conventional racks, such as dual-suspension mountain bikes. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 20-pounds with ease.
$59.95
A lighter duty version for MTB and commuter use. QR mechanism is secure and easy to use. 7 kg (15 lb) carrying capacity. Compatible with all MTX TrunkBags. Includes hidden storage tray, rubber bungee and safety reflector. - Clamp: Fits 25.4/31.8 mm (shims Incl.) - Bag Compatibility: MTX TurnkBags - Material: Aluminum beam / Plastic cargo deck - Max Weight Capacity: 7 Kilograms - Size: 51 x 12.5 x 9 cm / 20.1” x 4.9” x 3.5” - Weight: 688 grams
$42.95
Boost the carrying capacity of your Topeak MTX BeamRack (sold separately) with their Dual-Side Frame. It enables you to attach panniers and other Topeak MTX bags to your BeamRack.
$139.95
Patented rack attachment system works on virtually any bicycle from full-suspension mountain bikes to commuters and everything in between. - Patented attachment system secures easily - Tough construction allows for variety of rugged riding uses - Silent and vibration free performance - Includes rails for mounting panniers - Works on the rear seat stays and front fork - Works with any type of frame material
$99.95
A sturdy steel rack which allows for mounting Thule Yepp Maxi Easyfit and Thule Yepp Nexxt Child Bike seats. Features - Compatible with most 26" city and hybrid wheeled bikes - Supports up to 35Kg/77 lbs
$90.00
- 15kg carrying capacity. - Folding design allows it to fold down to size of a pizza box. - Lightweight aluminum, 13mm rails. - Can carry any side pannier with hooks that fit 13mm rails or larger. - Additional platform on top allows for an extra bag.
$120.00
Take your ride up a notch with the Front Rack and Adventure Plate combo. These Specialized e-bike accessories give you an extra carrying platform to carry up to 10kg on the front end of your Turbo Vado, Como, or Tero. The front rack system for the bike was designed thoughtfully for elegant integration at the front of your bike, and it features meaningful compatibility for carrying what you want, how you want to. - Compatible with Turbo Vado, Como, and Tero. - Mounts to compatible bikes via the headtube interface. - Optional MIK compatibility when the plate is removed. - Seamless integration of front light mount. - Max. Load 10kg. - Retailer installation is recommended.
$120.00
The Alternator Rack 190 is the rear rack solution for all Salsa 190mm-spaced Alternator dropout equipped frames. Load up your panniers, get off the beaten track, and start exploring! - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular AL-6061-T6 construction - 135 x 325mm cupped deck - Extra-long struts for improved range of fit. Straight and shaped (kinked) struts included - Large pannier hook stops - Black powdercoat finish - 15kg maximum recommended load - Mounting kit included - 765g
$120.00
Set out on an adventure with Salsa's Alternator Rear Rack. Built for 135mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.
$120.00
Set out on an adventure with Salsa's Alternator Rack. Built for 170mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.
$65.00
• Tubular 6061-T6 aluminum construction • Three-position mid-blade mount for improved fit • Large pannier hook stops • Powdercoat finish • Maximum recommended load 33lbs (15kg) • Requires inner and outer mid-blade eyelets
$110.00
The Down Under HD Rack is the recommended lowrider for world touring. Sturdy and dependable, the steel construction lends itself well to field repairs should a worst-case scenario occur. - Requires dual-sided, mid-blade mounts - Wide crossbars provide sturdy, secure attachment points for a pannier - Tubular 4130 CroMoly construction - Mounting system provides 35mm range of infinite adjustment to position the rack - Includes mounting hardware kit - Powdercoat finish - Maximum Recommended Load: 55lbs (25kg) - Sold in pairs - Requires inner and outer mid-blade eyelets
$99.00
Salsa's Wanderlust Rear Rack carries essentials for touring and bikepacking over the rear wheel of your bike. It's constructed from aluminum to keep the weight down and features multiple cross bars for panniers, a taillight mounting bracket, and a long, cupped deck to load up your gear. For easy installation, the Wanderlust features long, very adjustable struts.
$39.99
Planet Bike's Eco Rack is made of oversize tubular 6061-aluminum for maximum strength and stability. It's designed to provide complete heel clearance when you install packs. And, the pre-installed rack hardware makes it a cinch to mount the Eco Rack to your bike, too. This rack fits most road, mountain and hybrid bicycles and even includes a built-in platform, which doubles as a mini-fender on rainy rides.
$88.00
The Portland Design Works Bindle Rack is a seatpost-mounted rack designed to easily haul your gear on multi-day cycling tours or just across town. The rack is constructed of lightweight alloy and mounts to any size seatpost in seconds. Heavy-duty compression straps loop through saddle rails to carry your cargo. The Bindle Rack helps to prevent side-to-side sway while riding and rear wheel rub for riders with short seat posts. Place your tent, sleeping bag, drybag, or other gear directly onto the Rack platform and pull the compression straps tight to secure the load up against the bottom of your saddle. - Rack mount fits seatposts with diameters 22.0 - 31.6mm - Rack deck measures 133 x 343mm (5.25 x 13.5") - Total Rack length: 432 mm (17") - Rack weight: .35kg (13 ounces) - Rated to 5.34kg - Lifetime PDWarranty
$99.00
Strong and svelte, the Everyday Rack from Portland Design Works mounts to frames with or without eyelets and will fit around wheels and tires up to 29x2.4". The handsome bamboo platform is slightly tapered, giving the Everyday Rack a light, racy feel that looks great on a wide range of frame styles. The lower mounting bars allow panniers' center of gravity to be closer in line with your wheel, improving rear-end stability even when hauling heavy loads. Additionally, it means the platform is easily utilized, even when riding with two panniers. The Everyday Rack is crafted from durable alloy tubing, may be mounted to a rear wheel skewer, includes a tail light mounting point and solid, adjustable attachment arms. It's a breeze to install, so you'll be pedaling cargo in no time. Rated for up to 25 kgs (55 lbs). - Strong alloy tubing - Double ply bamboo deck - Deck measures: 209 x 76 mm (8.25 x 3") - Height: 419 mm (16.5") - Weight: 1.6 lbs  - Max Load: 25 kgs (55 lbs) - Lifetime PDWarranty
$115.00
You'll be amazed by how much cargo you can transport with your very own Loading Dock. This attractive rear rack from Portland Design Works isn't just a pretty face, either. Its graceful curving supports and two-ply bamboo deck add strength to support up to 35 pounds so you can load 'er up with all the essentials. - Lightweight aluminum tubing - Double ply bamboo deck - Deck measures: 140 x 381 mm (5.5 x 15") - Height: 368 mm (14.5") - Weight: 2 lbs - Rated to 16 kgs (35 lbs)
$99.00
You'll be able to haul a real payload with this strong rack from Portland Design Works. The Payload isn't just a pretty face, either. Its graceful curving supports and two-ply bamboo deck add strength to support a whopping 77 pounds of cargo. So you can bring everything along for the ride, from a week's groceries to the literal kitchen sink, you know, just in case. - Strong steel tubing - Double ply bamboo deck - Deck measures: 140 x 381 mm (5.5 x 15") - Height: 368 mm (14.5") - Weight: 1360 g (3 lbs) - Rated to 35 kgs (77 lbs)
$120.00
Get it to go with Portland Design Works' Takeout Basket. This handsome rack attaches to your handlebars for easy access to the included waterproof, removable roll-top bag. The rack is made from light, sturdy aluminum tubing and includes thoughtful features like an eyelet for mounting a light and a slot for carrying your u-lock (both sold separately). - Conveniently carry a six pack of bottles, five burritos, three chinchillas or an extra layer of clothing - Fits 25.4 - 31.8mm handlebars (even fits between drop bars) - Includes water resistant roll top bag that clips securely into basket - Eyelet for attaching light mount - Integrated u-lock carrying slot - Rugged, lightweight 10 mm alloy tubes - Rack weight: 500 grams - Inside of basket dimensions: 155mm x 255mm x 105mm - Lifetime PDWarranty
$110.00
The ultimate bike rack! The Ortlieb Rack Three offers you the right solution, whether you're on your way to work, the grocery store, or around the world. One unique advantage of this all-purpose bike rack is its compatibility with all Ortlieb attachment systems. Outfitted with convenient mounting elements for the QL3 and QL3.1 systems, the Rack Three allows you to attach all Ortlieb bags directly to your bike without any other modifications. If you want to use the Rack Three exclusively for your QL2.1/2/1 bags, you can easily remove the attachment elements for the QL3.1/QL3 and thereby create even more space for your panniers. The Rack Three's double-rail design allows you to attach all bike bags with a QL2.1, QL2 or QL1 system to a top level or a lower level. Selecting the lower level gives you the option of simultaneously attaching a bike basket or a Trunk-Bag to the top of your bike rack and expanding your overall stowage space. Rack Three is suitable for bicycles with wheel sizes of 26" and 28". - City and touring aluminum rack with two mounting levels - For wheel size 26"/28" (1 size) * Width of support surface 120 mm - Compatible with all Ortlieb mounting elements (QL1, 2, 2.1, 3 or 3.1 system) - With three integrated QL3/QL3.1 mounting elements on each side - Further mounting components are not required for QL3/QL3.1 bags - Suitable for direct mounting of QL3/QL3.1 products (e.g Back-Roller Urban, Single-Bag, Office-Bag, Downtown Two, Vario, City-Biker, Commuter-Bag) - QL3/QL3.1 lock heads can be easily removed for fixing panniers with QL1, QL2 or QL2.1 system; dummy plugs for borings included - Second mounting level for simultaneous use of pannies on sides and basket or Trunk-Bag on top - Mounting for optional rear light (not included) - Maximum capacity: 30 kg/66 lbs.
$60.00
Old Man Mountain Axle Pack is unlike any fork mount adapter you’ve seen. Rather than trying to clamp to round or tapered surfaces and just hope it doesn’t slip or spin, Axle Pack is thru-axle mounted, making it impossible to slip or spin. Axle Pack is designed to be mounted to Old Man Mountain Thru Axle Fit Kits. With 3-pack mounts on the uprights you can carry bottles, fuel, stuff sacks, dry bags, bolt-on bags, and more. With four mounting points you can also choose to run your gear higher or lower depending on your needs. - Provides 3-pack mounts on any thru-axle fork - Axle Pack is rated to 10kg per pair - Four mounting points you can also choose to run your gear higher or lower depending on your needs
$178.00
Old Man Mountain racks are the most versatile racks available. Capable of mounting to full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that's what you're into. Tested and trusted in the most extreme environments on earth (we're still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn't made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need. - The Divide Fat fits up to 26×5" or 27.5×4.6" tires. - Front or rear mountable. - Made from 6061 aluminum the racks are lightweight, stiff, and strong. - The main rack frame is made of 1/2" (13 mm) diameter tubing for durability and the pannier rails are 3/8" (10 mm) diameter to fit all panniers. - The low pannier rail makes it a breeze to load and unload panniers with gear lashed to the deck. - The deck measures 5.1" x 12" (130 mm x 306 mm) - The deck includes slots for easily lashing gear in place and holes for mounting a light. - The dropouts are height adjustable to keep the weight loaded low on the bike and fit a wide range of tire sizes. - The Divide Fat come standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting. - The Divide has a load capacity of 55 lbs when eyelet is mounted. For more adventurous endeavors we offer thru-axle or QR Fit Kits, that mount the rack to the axle and increase the load capacity to a whopping 70 lbs! - Powder coated a sleek and refined shade of black - Made in Taiwan - Stainless Steel mounting hardware - Lifetime warranty!
Page 1 of 2 Next page